During the maintenance and repair of the Fruit Juice Production Line, the circuit breaker should be cut off or the power plug should be unplugged to prevent electric shock, burns and injury during the inspection.
The pressure of the compressed air of the filling machine should be zero during maintenance. It must be confirmed that the pressure has dropped to zero before the components on the compressed air side can be disassembled. Trial operation of the three-phase motor ensures correct running direction and ensures pressure and flow of compressed air. Check whether each motor, bearing, etc. need to add lubricating oil. It is strictly forbidden to run without oil. After normal operation, the machine can be started. At the same time, observe whether the fasteners in each part are loose or not. After the operation of each part is stable, it can be used normally. Before starting the machine, carefully check whether all the water tanks have water, whether the chain plate is stuck, whether there is any debris on the conveyor belt, whether there is a bottle cap in the storage box, whether the water source, power source and air source are connected. After the conditions are ready, Then, the main power supply QF is closed, the power indicator light is on, the fault indicator light and the emergency stop indicator are not lit, then the starting condition is met, press the start button on the control box and the start switch at the filling station, after the buzzer three alarms The whole machine starts running and enters the external washing, rinsing and filling automatic working mode. The stop button can be pressed at the filling station and the control box, and the main power should be turned off after the shutdown.
The juice production line uses polyester bottles to produce various kinds of juices, juices, juices and other non-gas beverages. It can be used for rinsing, filling and capping on one machine. Introducing the latest technology from Japan and Italy, adopting the principle of pressure type fixed liquid surface filling, the filling speed is fast, the liquid level control is stable, and there is no dripping phenomenon. The spring-type rinsing pliers hand, the empty bottle automatically rotates 180° with the track, and the inside and the outside are flushed twice, and the rinsing efficiency is high. The magnetic torque type capping head is used to realize the function of gripping and screwing. The capping torque is steplessly adjustable, with a constant force to resist the rotation of the plastic cover, and does not hurt the cover, the sealing is strict and reliable.
The whole machine adopts PLC computer program control and human-machine interface touch screen button. It has automatic control of liquid level in material cylinder, no bottle is not filled, no bottle is not covered, and it does not hurt the cover, and the sealing is strict and reliable. High precision: filter out bacteria, rust, colloids, macromolecular organic substances and other substances in water. The main indicators such as micro-elements and turbidity that purify human health are better than the sanitary standards for bottled drinking water. Long life: Because the ultrafiltration machine adopts the principle of vertical cross-filtering, it is automatically cleaned and not easy to be dirty. Therefore, in the normal use of the family, the life of the filter element is 30-50 times that of the ordinary water purifier. Large flux: It can meet the needs of direct drinking, beauty, bathing, eating, sanitation and so on. Low cost: Because the ultrafiltration machine has a large flux, long life and maintenance-free, the treatment cost per ton of purified water is only about one yuan, far lower than other purification devices.
Shanghai Jimei Food Machinery Co., Ltd. welcomes the Milk Processing Plant to contact us. We have complete equipment to ensure that you can find the right one for you.
The pressure of the compressed air of the filling machine should be zero during maintenance. It must be confirmed that the pressure has dropped to zero before the components on the compressed air side can be disassembled. Trial operation of the three-phase motor ensures correct running direction and ensures pressure and flow of compressed air. Check whether each motor, bearing, etc. need to add lubricating oil. It is strictly forbidden to run without oil. After normal operation, the machine can be started. At the same time, observe whether the fasteners in each part are loose or not. After the operation of each part is stable, it can be used normally. Before starting the machine, carefully check whether all the water tanks have water, whether the chain plate is stuck, whether there is any debris on the conveyor belt, whether there is a bottle cap in the storage box, whether the water source, power source and air source are connected. After the conditions are ready, Then, the main power supply QF is closed, the power indicator light is on, the fault indicator light and the emergency stop indicator are not lit, then the starting condition is met, press the start button on the control box and the start switch at the filling station, after the buzzer three alarms The whole machine starts running and enters the external washing, rinsing and filling automatic working mode. The stop button can be pressed at the filling station and the control box, and the main power should be turned off after the shutdown.
The juice production line uses polyester bottles to produce various kinds of juices, juices, juices and other non-gas beverages. It can be used for rinsing, filling and capping on one machine. Introducing the latest technology from Japan and Italy, adopting the principle of pressure type fixed liquid surface filling, the filling speed is fast, the liquid level control is stable, and there is no dripping phenomenon. The spring-type rinsing pliers hand, the empty bottle automatically rotates 180° with the track, and the inside and the outside are flushed twice, and the rinsing efficiency is high. The magnetic torque type capping head is used to realize the function of gripping and screwing. The capping torque is steplessly adjustable, with a constant force to resist the rotation of the plastic cover, and does not hurt the cover, the sealing is strict and reliable.
The whole machine adopts PLC computer program control and human-machine interface touch screen button. It has automatic control of liquid level in material cylinder, no bottle is not filled, no bottle is not covered, and it does not hurt the cover, and the sealing is strict and reliable. High precision: filter out bacteria, rust, colloids, macromolecular organic substances and other substances in water. The main indicators such as micro-elements and turbidity that purify human health are better than the sanitary standards for bottled drinking water. Long life: Because the ultrafiltration machine adopts the principle of vertical cross-filtering, it is automatically cleaned and not easy to be dirty. Therefore, in the normal use of the family, the life of the filter element is 30-50 times that of the ordinary water purifier. Large flux: It can meet the needs of direct drinking, beauty, bathing, eating, sanitation and so on. Low cost: Because the ultrafiltration machine has a large flux, long life and maintenance-free, the treatment cost per ton of purified water is only about one yuan, far lower than other purification devices.
Shanghai Jimei Food Machinery Co., Ltd. welcomes the Milk Processing Plant to contact us. We have complete equipment to ensure that you can find the right one for you.
コメント